IOT TRAINER KIT
SPECIFICATIONS
On Chip Facilities
- Built in LPC1768 Cortex M3 32bit Microcontroller(Next Generation Core)
- Operate at up to an 100 MHz CPU frequency
- Cortex-M3 CPU incorporates a 3-stage pipeline
- On chip 512kb flash for monitor programming
- On chip 64kb RAM
- On Chip Ethernet MAC & 8 channel general purpose DMA controller
- On Chip 4 UARTs(UART0,UART1,UART2,UART3) & 2 CAN channels
- On Chip 2 SSP controllers & SPI interface
- 3 I2C interfaces(I2C0,I2C1,I2C2), 2-input plus 2-output I2 interface
- On chip 8 channel 12 Bit ADC & One 10-bit DAC
- On Chip Motor Control PWM, Quadrature Encoder interface
- On chip Ultra-Low Power RTC with built in Battery Backup
- On Chip 4 general purpose Timers/Counters(Timer0,Timer1,Timer2,Timer3)
- On Chip 6-output general purpose PWM
- On Chip up to 70 general purpose I/O pins
- On chip 32bit watchdog timer
- On Chip Cortex-M3 system tick timer including an external clock input option
- On Chip Repetitive interrupt timer provides programmable and repeating timed interrupts.
- On chip Four external interrupt inputs configurable as edge/level sensitive
- On Chip USB Port
- Operated at Single 3.3 V power supply (2.4 V to 3.6 V).
IOT Built in Facilities
- Built in WIFI module (Xbee S6B)
- Built in wireless module (Xbee S2B)
- Built in Bluetooth module BTPro
- Built in 4x16/4x20 LCD
- Built in I2C based 4 digit 7 segment display
- Built in 8 LEDs
- Built in POT for 12 bit ADC experiment
- Built in12 bit DAC port
- Built in 7 push to on switches
- Built in SD MMC card
- Built in DS1307 RTC
- Built in 64kb,24c64,I2C based EEPROM
- Built in Stepper Motor Driver with port for Stepper Motor
- Built in 4 POT for WIFI experiment
- Built in 4 Toggle switches for WIFI experiment
- Built in 3 PWM LED IOT
- Built in 4 LED for WIFI experiment
- Built in 3 relays
- Built in 12v &3.3v regulator
- Built in Power port
- Built in 4 sensor ports
- Built in I2C ports
- Built in JTAG ports
IOT TRAINER KIT EXPERIMENT LIST
WIFI EXPERIMENTS
1. Develop ON/OFF Display Widgets on Digi Cloud Screen to control LEDs in IOT Trainer kit
2. Develop ON/OFF Switches Widgets on Digi Cloud Screen to monitor the position of toggle switches in IOT trainer kit
3. Develop PWM slider Widget on Digi Cloud Screen and control Brightness of PWM LEDs in IOT trainer kit
4. Develop line graph Widget on Digi Cloud Screen and draw graph by varying ADC POTS in IOT trainer kit
5. Develop Gauge Widget on Digi Cloud Screen and control Gauge Widget varying ADC POTS in IOT trainer kit
6. Develop Bar Graph Widget (vertical) on Digi Cloud Screen and control Bar Graph varying ADC POTS in IOT trainer kit
7. Develop Bar graph widget (Horizontal) ) on Digi Cloud Screen and control by Bar Graph varying ADC POTS in IOT trainer kit
8. Develop Tilt indicator widget on Digi Cloud Screen and control by varying ADC POTS in IOT trainer kit
9. Develop Serial data Widget on Digi Cloud Screen and control Cortex M3 activities like
1. Varying ADC POTS of On Chip 12bit ADC
2. Receive and Display in Digi Cloud Screen the 12 bit ADC value
3. Vary the Stepper Motor speed
4. Display Messages on LCD Display
5. Switch ON/OFF LEDs
6. Switch ON/OFF Relays
7. Collect Temp sensor information and monitor service port widget
BLUETOOTH EXPERIMENT
1. Develop basic android App using Android Studio to display “WELCOME TO VASEE” on the cell phone screen
2. Develop Text View widgets on the Android cell phone screen and display Messages
3. Develop Button & Text screen on the cell phone screen and display Messages on Button Press
4. Develop multiple Button Widgets on Android cell phone Screen and SwitchON/OFF IOT Trainer kit LEDs
5. Develop text widgets and button on cell screen and send display messages to display IOT Trainer kit LED screen
6. Develop Text screen Widget on Android cell phone screen and display 12 bit ADC value from IOT Trainer kit
7. Develop Button Widget on Android cell phone screen and control Relay in IOT Trainer kit
8. Develop Text View Widget on Android cell phone screen and display temperature sensor information from IOT trainer kit
9. Interface PC with IOT Trainer kit and set PC date & time from Android cell phone RTC Date & TimeValue
10. Send alert messages to Android cell phone screen from IOT trainer kit
11. Send and Receive messages from Digi Cloud Screen from Android cell phone
ZIGBEE SENSOR NETWORK EXPERIMENT
1. Develop Zigbee Sensor network with one Coordinator and 3 Routers using IOT Trainer Kit as Coordinator
2. Develop Coordinator program to collect information from 3 different Routers and display on IOT Trainer kit LCD display
3. Interface IOT Trainer kit with PC, develop visual basic program to collect Router1, Router2, Router3 information and display on PC screen
4. Develop VB program with different Button and control Router LEDs from PC screen through IOT Trainer kit Coordinator
5. Develop Coordinator program in IOT Trainer kit to control Temperature in remote Routers
6. Develop Serial Data Widget at Cloud Screen and collect information from Zigbee Sensor network Router through IOT Trainer kit
7. Develop Serial Data Widget on Digi cloud screen and switch ON/OFF Relays in Zigbee network Routers through IOT Trainer kit
LIVE DEMO ON IOT TRAINER KIT CLICK THE LINK BELOW
https://youtu.be/uBGYR2V0PiA
