Platform Independent Trainer Kit Base Board  (VE120)

Base Board Specification

• Built in 2 nos of 16 pin FRC connector for mother board accommodation

• Built in 2X16 line/4X20 line LCD display

• Built in 64X128 graphic display

• Built in 2 digit seven segment display.

• Built in 2 relays with 3 Pin Molex connector

• Built in DS1307 RTC with Backup battery

• Built in variable pot for ADC input.

• Built in 3 pin RMC for temperature sensor.

• Built in 4X4 matrix key board

• Built in 8 LEDs for LED blink experiment

• Built in 3 Push to ON switches.

• Built in 11 nos of 8 Pin RMC connectors and 9 nos of 4 Pin RMC connectors for inter connection between mother board and base board.

LCD and Graphics Display interface Application
Description
In this Application ,the graphics display and 2x16 LCD Devices are connected with LPC2148
(Mother board on the Base Board slot) by connecting cable. Source code is written in embedded C
Using KEIL IDE and compiled in to .hex file. Then loaded in to lpc2148 Using USB Port in built or
JTAG Port built in by D Link adopter and Executed.

LPC2148 Mother Board
Specification

• Built in LPC2148 32 Bit Microcontroller.

• Built in 2 nos. of 16 pin FRC Connector to insert in the Base board slot.

• Built in USB for ISP Programming.

• Built in 20 pin FRC for JTAG interface.

• Built in 9 pin D Type connector for RS232 Interface.

• USB Powered with built in 3.3v regulators.

• Built in Battery packup for Onchip RTC.

PIC16F877A Mother Board
Specification

• Built in 40 pin PIC 16F877A 8 bit Microcontroller.

• Built in USB for PC Interface.

• Built in 5 pin connector for PICKIT3 Programmer interface.

• Built in 2 nos. of 16 pin FRC Connector to insert in the Base board slot.

• USB Powered.

89C52 Mother Board
Specification

• Built in 89c52 8 bit Microcontroller

• Built in 2 nos. of 16 pin FRC Connector to insert in the Base board slot

• Built in 8279 Key Board and Display Interface

• Built in 6 Digit 7 segment Display(Address And Data)

• Built in 6264 16 kb RAM

• Built in 8255 with Port A, Port B, Port C Lines Connected with Slots

• Built in USB For programming from PC

• User can develop source code in Embedded C USING KEIL IDE.

• USB Powered